BOLERO-LT2 -The Advanced Vehicle Tracking System

  • State-of-the-art GSM/GPRS technology for 2-way communication
  • Latest GPS technology for positioning
  • Compact, low-cost and light-weight unit
  • Delivers high performance and very flexible applications
  • Customized firmware configuration
  • Different communication channels
  • Wide variety of events and states for sending reports
  • Remote administration & firmware update
  • Allows to create customized protocols
  • Data-Logger functionality
  • Powered from vehicle main battery
  • Backup battery to back up the main power supply
  • Custom housing and packaging design possible
  • Internal GPS/GSMantennas
  • E1/CE approved

BOLERO-LT2 - The advanced vehicle tracking system

BOLERO-LT2 consists of a Quad-band GSM/GPRS engine that works on the four frequencies GSM 850/900/1800/1900 MHz, a 50 channel high sensitive GPS core based on µ-blox engine and an embedded configurable software that provides many features for using location-based applications. The new device can be easily integrated into a variety of new applications stretching from real-time navigation and positioning to remote tracking and monitoring. It is designed for indoor use and ideal for fixed installation. The device concept is targeting for direct implementation as a mobile client in a wide range of high volume, low-cost, flexible system solutions like AVL, fleet management, vehicle security and recovery and other related area. The tracking functionality of the embedded mobile client application is combined with variety of alert messaging capabilities. The configurable alert messages contain current position of the device and many status reports. The physical interface to the terminal application is made through a 5pin connector. It provides a serial port giving you maximum flexibility for device configuration, receiving GPS location data and 1 digital input for monitoring the vehicle ignition. Depending on how the system BOLERO-LT2 is set up, their corresponding events can be used for a wide variety of notification purposes.
The embedded software the embedded software can be controlled by word like “PFAL” commands needed for executing particular actions, reading or setting particular configurations into the BOLERO-LT2 device. These commands are valid for all kinds of operations including SMS, CSD, TCP and SMTP.
BOLERO-LT2 provides Geofence features for territory management, route verification, prohibited locations, parking area and more with exception reporting to a wide variety of events, such as arrivals, departures, deliveries, pick-ups, illegal entries, unauthorized movement, etc.. BOLERO-LT2 contains a data-logger that enables you to archive unique locations in sequence for up to 45 days for later analysis and evaluation (for example, with an archive interval up to 20 sec.).

Available options for BOLERO-LT2

For the complete list of options and accessories please refer to the Falcom Product Ordering Guide 2015.


GSM/GPRS core Quad-band GSM/GPRS engine
850/900/1800/1900 MHz
GPRS class 10, class B
TCP/IP (accessible via PFAL commands)
GPS core 50 channel GPS receiver
AGPS Offline / Autonomous
Protocols: NMEA, FALCOM (binary)
- Position 2.5 m
- SBAS 2 m
- TTFF hot start: < 1 s average
- Cold Start: 26 sec.
- Cold starts: -148 dBm
- Tracking: -160 dBm
- Velocity: 500 m/s (972 knots)
- Altitude: 50.000 m
- Update rate: 1 Hz
Processor core ARM7/TDMI
Memory: 8 MB Flash / 2 MB RAM
Electrical characteristics Power: +10,8 V to +32 V DC
Rechargeable Li-Polymer backup battery 1000mA *
Physical characteristics Dimensions (L x W x H): 85 x 56 x 24 mm
Weight: approx. 90 g
Temperature range** Storage: -40 °C to +85 °C
Operating: -40 ° to +85 °C
GSM: -40 °C to +85 °C
Battery* discharging temp.: -20 °C to +60 °C
Battery* charging temp.: 0 ° to +45 °C
Motion sensor 3-axis motion sensor*    
Interfaces 1 x Digital input (Ignition)
1 x RS232 V24 level (RX, TX, GND - for device
configuration only, and not for connecting external

1 x SIM card reader for 1,8/3 V SIM cards
4 x LED indicators free-programmable
1 x Button free-progammable
Serial Data Rates 4800 bps...115200 bps    


* optional availbale

**  The GSM/GPRS module is fully functional (-20 °C to + 55 °C meets the 3GPP specifications).